Polymaker PC-Plus™ is a polycarbonate based filament designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat resistance, with moderate printing temperatures and great warping resistance. It is required to use BuildTak as the printing surface for Polymaker PC-Plus™.
Glass Transition Temp
1.19 – 1.20 g/cm³
1.75 mm or 2.85 mm
± 0.05 mm 50 Microns (Typical~ ± 0.02 mm)
General Printing Settings
Recommended printing temperature
250 – 270 °C (Diameter of 1.75 mm)
250 – 270 °C (Diameter of 2.85 mm)
Recommended printing speed
30 – 90 mm/s
Recommended Heated bed temperature
If equipped set to 80 °C
BuildTak™ is required
It is required that you use Polymaker PC-Plus™ with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers.