Description
PVA is the best candidate for printing supports. It’s soluble in hot water.
This filament comes on a vaccum sealed 300g spool.
material Type: | Polyvinylalcohol |
Weight on the spool: | 300 gr |
Printing temperature: | 180 – 205°C |
melting temperature: | 163°C |
Print speed: | 25mm/sec – 250mm/sec |
Recommended temperature printbed: | ± 35 – 60 °C |
diameter tolerance: | 1,75mm: ± 0,05mm / 2,85mm: ± 0,10mm |
roundness: | ≥ 95% |
Specific gravity: | 1,23 g/cc |
Tensile strength: | 78 MPa |
Strain at break: | 9,90% |
Tensile modulus (1mm / min): | 3860 MPa |
Vicat softening temperature: | 60,2°C |
Reviews
There are no reviews yet.