ICE Filaments PLA+ is a high qualitative PLA with excellent performance on speed, mechanical properties and high heat environments. PLA+ can be printed with printing speeds of more than 120mm/s. This combines efficiency with quality. By the material composition of PLA+, it is an alternative for ABS, but without the hazardous biological additions and disadvantages like shrinking and delamination.
Also, PLA+ is highly crystalline after printing, which increases the stiffness of the material at higher temperatures. By annealing the PLA+ after printing you optimize its performance. Annealing is a form of post-processing where the print is heated up to 95°C or higher, after which the print is cooled down until room temperature. PLA+ is mostly used for industrial applications that require the combination of easy to print and high mechanical properties.
ICE stands for Innovate, Create, Explore. ICE Filaments was created to offer each user a high qualitative alternative for printer branded filaments. We tested ICE Filaments thoroughly on every 3D printer in our gamma.
– Prints like PLA, performs like ABS
– Engineered for fast printing (> 120mm/s)
– Heat resistant at high temperatures
– HDT after annealing 95°C+
– Semi matte finish
– Negligible shrinkage after annealing
Recommended print temperature
220°C – 250°C
Recommended heated bed temperature
50°C – 60°C